職位描述
該職位還未進行加V認證,請仔細了解后再進行投遞!
Job Responsibilities:
61 Responsible for the design of the battery pack's high voltage electrical system, including high voltage distribution, contactors, fuses, current/voltage/temperature sampling circuits, etc.
61 Design low voltage control circuits for the battery pack, such as BMS power supply, wake-up, communication (CAN/LIN), and signal acquisition circuits.
61 Develop electrical schematics, wiring diagrams, PCB layouts, and guide hardware engineers to complete the design implementation.
61 Participate in BMS hardware design, including AFE, MCU selection, isolation communication, power management, etc.
61 Ensure BMS hardware meets functional safety and EMC requirements.
61 Coordinate the matching of the battery pack's electrical system with the vehicle's high voltage system, ensuring reliable high voltage interlock (HVIL) and insulation detection functions.
61 Lead electrical system testing (e.g., withstand voltage, insulation, EMC, functional safety), analyze and resolve testing issues.
61 Prepare technical documents such as electrical design specifications, DFMEA, etc.
61 Track domestic and international standards related to battery electrical systems, ensuring design compliance.
主要職責:
61 負責電池包高壓電氣系統設計,包括高壓配電、接觸器、保險絲、電流/電壓/溫度采樣電路等。
61 設計電池包低壓控制電路,如BMS供電、喚醒、通信 (CAN/LIN) 及信號采集電路。
61 制定電氣原理圖、線束圖、PCB布局,并指導硬件工程師完成設計實現。
61 參與BMS硬件設計,包括AFE、MCU選型、隔離通信、電源管理等 。
61 確保BMS硬件滿足功能安全及EMC要求 。
61 協調電池包電氣系統與整車高壓系統的匹配,確保高壓互 (HVIL)、絕緣檢測等功能可靠 。
61 主導電氣系統測試 (如耐壓、絕緣、EMC、功能安全等), 分析并解決測試問題 。
61 編寫電氣設計規范、DFMEA等技術文檔 。
61 跟蹤國內外電池電氣系統相關標準,確保設計合規 。
Job Requirements:
61 Bachelor's degree or above in Electrical/Electronic/Automation/Vehicle Engineering, or related fields. Master's degree preferred.
61 Over 8 years of experience in electrical or BMS hardware development for battery packs, familiar with high voltage electrical system design and safety standards.
61 Experience in leading new energy vehicle companies or top battery companies is preferred.
61 Complete battery pack development project experience, familiar with the process from design to mass production (e.g., V-model development).
61 Proficient in electrical design tools (e.g., Altium Designer/Cadence/PAD), familiar with wiring harness design (CATIA/CHS).
61 Familiar with the selection and reliability design of high voltage components (e.g., contactors, fuses, current sensors).
61 Master the BMS hardware development process, understand the application of AFE and MCU .
61 Familiar with functional safety and EMC design.
61 Good written and verbal English skills, enjoys teamwork, interested in new technologies, and self-motivated.
職位要求:
61 本科及以上學歷,電氣工程、電子工程、自動化、車輛工程等相關專業,碩士優先。
61 8年以上動力電池包電氣或BMS硬件設計經驗,熟悉高壓電氣系統設計及安全規范。
61 具備新能源車企或頭部電池企業工作經驗者優先。
61 有完整電池包開發項目經驗,熟悉從設計到量產的流程(如V模型開發)。
61 精通電氣設計工具 (如Altium Designer/Cadence/PAD等),熟悉線束設計 (CATIA/CHS)。
61 熟悉高壓元器件 (接觸器、保險、電流傳感器等) 選型及可靠性設計。
61 掌握BMS硬件開發流程,了解AFE及MCU應用。
61 熟悉功能安全及EMC設計。
61 較好的英語書寫、溝通能力,喜歡團隊協作,對新技術感
61 Responsible for the design of the battery pack's high voltage electrical system, including high voltage distribution, contactors, fuses, current/voltage/temperature sampling circuits, etc.
61 Design low voltage control circuits for the battery pack, such as BMS power supply, wake-up, communication (CAN/LIN), and signal acquisition circuits.
61 Develop electrical schematics, wiring diagrams, PCB layouts, and guide hardware engineers to complete the design implementation.
61 Participate in BMS hardware design, including AFE, MCU selection, isolation communication, power management, etc.
61 Ensure BMS hardware meets functional safety and EMC requirements.
61 Coordinate the matching of the battery pack's electrical system with the vehicle's high voltage system, ensuring reliable high voltage interlock (HVIL) and insulation detection functions.
61 Lead electrical system testing (e.g., withstand voltage, insulation, EMC, functional safety), analyze and resolve testing issues.
61 Prepare technical documents such as electrical design specifications, DFMEA, etc.
61 Track domestic and international standards related to battery electrical systems, ensuring design compliance.
主要職責:
61 負責電池包高壓電氣系統設計,包括高壓配電、接觸器、保險絲、電流/電壓/溫度采樣電路等。
61 設計電池包低壓控制電路,如BMS供電、喚醒、通信 (CAN/LIN) 及信號采集電路。
61 制定電氣原理圖、線束圖、PCB布局,并指導硬件工程師完成設計實現。
61 參與BMS硬件設計,包括AFE、MCU選型、隔離通信、電源管理等 。
61 確保BMS硬件滿足功能安全及EMC要求 。
61 協調電池包電氣系統與整車高壓系統的匹配,確保高壓互 (HVIL)、絕緣檢測等功能可靠 。
61 主導電氣系統測試 (如耐壓、絕緣、EMC、功能安全等), 分析并解決測試問題 。
61 編寫電氣設計規范、DFMEA等技術文檔 。
61 跟蹤國內外電池電氣系統相關標準,確保設計合規 。
Job Requirements:
61 Bachelor's degree or above in Electrical/Electronic/Automation/Vehicle Engineering, or related fields. Master's degree preferred.
61 Over 8 years of experience in electrical or BMS hardware development for battery packs, familiar with high voltage electrical system design and safety standards.
61 Experience in leading new energy vehicle companies or top battery companies is preferred.
61 Complete battery pack development project experience, familiar with the process from design to mass production (e.g., V-model development).
61 Proficient in electrical design tools (e.g., Altium Designer/Cadence/PAD), familiar with wiring harness design (CATIA/CHS).
61 Familiar with the selection and reliability design of high voltage components (e.g., contactors, fuses, current sensors).
61 Master the BMS hardware development process, understand the application of AFE and MCU .
61 Familiar with functional safety and EMC design.
61 Good written and verbal English skills, enjoys teamwork, interested in new technologies, and self-motivated.
職位要求:
61 本科及以上學歷,電氣工程、電子工程、自動化、車輛工程等相關專業,碩士優先。
61 8年以上動力電池包電氣或BMS硬件設計經驗,熟悉高壓電氣系統設計及安全規范。
61 具備新能源車企或頭部電池企業工作經驗者優先。
61 有完整電池包開發項目經驗,熟悉從設計到量產的流程(如V模型開發)。
61 精通電氣設計工具 (如Altium Designer/Cadence/PAD等),熟悉線束設計 (CATIA/CHS)。
61 熟悉高壓元器件 (接觸器、保險、電流傳感器等) 選型及可靠性設計。
61 掌握BMS硬件開發流程,了解AFE及MCU應用。
61 熟悉功能安全及EMC設計。
61 較好的英語書寫、溝通能力,喜歡團隊協作,對新技術感
工作地點
地址:無錫無錫高新區(新吳區)江蘇省無錫市新區新榮路16號
??
點擊查看地圖
詳細位置,可以參考上方地址信息
求職提示:用人單位發布虛假招聘信息,或以任何名義向求職者收取財物(如體檢費、置裝費、押金、服裝費、培訓費、身份證、畢業證等),均涉嫌違法,請求職者務必提高警惕。
職位發布者
Emma..HR
卡特彼勒技術研發(中國)有限公司
-
機械制造·機電·重工
-
500-999人
-
外商獨資·外企辦事處
-
高新技術開發區新慶南路5號
相似職位
-
成套結構設計工程師 6000-12000元江陰市 應屆畢業生 本科江蘇安科瑞電器制造有限公司
-
包裝設計工程師 面議錫山區 3年以上 大專無錫吉興汽車部件有限公司
-
大件運輸項目經理 面議無錫高新區(新吳區) 應屆畢業生 不限大連瑞橋金德物流集團有限公司
-
機械設計工程師 面議無錫高新區(新吳區) 應屆畢業生 不限無錫市博宇塑機有限公司
-
Project Management -X射線/CT/DR/球管 項目經理 面議無錫高新區(新吳區) 應屆畢業生 本科西門子(深圳)磁共振有限公司

8年以上
本科
2026-03-24 10:43:18
1328人關注
注:聯系我時,請說是在無錫人才網上看到的。
